How it works:
Step 1
Choose the areas you want to have lit; we suggest you then sketch a rough plan view of each area involved.
Step 2
Choose the fittings which will suit your requirements, and list them, with the quantity required where relevant. Be careful to keep a note of the voltage of the fittings chosen.
Step 3
Measure the distance involved for the Plug & Go models chosen and determine, from the cable set options available, which cable set or sets will be needed. Remember, up to 80 metres of cable can be used from 1 LED driver, but the wattage loading must not exceed the recommended maximum.
Step 4
Plan where the mains supply will originate from. With the Plug & Go system you have a choice of placing the LED driver / drivers in an IP rated wall box on an exterior wall. However, depending on how large an area is involved, sometimes more than one mains feed may be needed in different locations. Consultation with an electrician is advisable on this matter.
See also Cables, Cable Extensions and 3 Way Adaptor.
About our independent reviews and rating system
When you shop with us and your items have been despatched, you should receive a very short survey form from Feefo inviting you to rate your experience of us and the items you have bought. You can choose one of 5 star ratings and add a comment that could help your fellow shoppers. This is what you will see:
Tells us like it is please; this will improve our understanding of what we do wrong and what we get right. Your feedback will also be shown anonymously (unless you wish to be named) on our website to help others in their decisions. Ratings for the product are shown on each page and our overall service rating is displayed below:
